Volume 1, D – 94: Mechanical behaviour of brick masonry arches strengthened by GFRP sheet and CFRP plates
Author BORRI, A.; CASTORI, G.; CORRADI M. University of Perugia, Department of Civil and Environmental engineering Abstract This paper aims to comparise and illustrate the behaviour of two different FRP […]
Volume 1, D – 93: Behaviour of interlocking grouted brick masonry under cyclic compressive loading
Author E NAZAR, M. NNC Design International, New Delhi, India SINHA, S. N. Department of Civil Engg., Indian Institute of Technology, Delhi, New Delhi, India Abstract An experimental investigation had […]
Volume 1, D – 90: Propagation of elastic waves on stone masonry walls
Author MIRANDA, L. and RIO, J. and GUEDES, J Faculty of Engineering of University of Porto, Civil Engineering Dept. COSTA, A. University of Aveiro, Civil Engineering Dept. Abstract Non-destructive testing […]
Volume 1, D – 76: Experimental evaluation of some mechanical properties of large lightweight concrete and clay masonry and comparison with EC 6 expressions
Author SOUSA, H.; SOUSA, R. Faculty of Engineering, University of Porto – Portugal, DEC, Gequaltec Abstract Reflecting the recent European Directives concerning building energy efficiency, two new envelope type masonry […]
Volume 1, D – 45: Experimental study on the influence of openings and tie columns on masonry walls subjected to cyclic loading
Author MOHAMMAD AGHA, H.; LI, Y.; ASAL SALIH, O.; ZHENG N. Chongqing University, Department of Civil Engineering Abstract This paper presents test results of eight masonry walls, four of them […]
Volume 1, D – 34: Non-destructive test methods in the calcium silicate industry
Author EDEN, W. Forschungsvereinigung Kalk-Sandstein e. V., Hannover, Germany MEYER, G. Bundesverband Kalksandsteinindustrie e. V., Hannover, Germany Abstract Calcium silicate units are highly resistant masonry units, composed of mainly burnt […]
Volume 1, D – 29: Contribution of mortar overlay in the concrete masonry strengthened under axial compression
Author OLIVEIRA, F. L. University of São Paulo, Faculty of Architecture and Urbanism, Department of Architecture Technology HANAI, J. B. University of São Paulo, Sao Carlos School of Engineering, Department […]
Volume 1, D – 20: Strengthening of masonry elements using sprayed strain hardening cement-based composites
Author MECHTCHERINE, V.; BRÜDERN, A.-E.; BUTLER, M. TU Dresden, Institute of Construction Materials Abstract This paper reports the results of a research on the strengthening of masonry by means of […]
Volume 1, D – 8: Load tests on masonry wallettes subjected to cyclic shear
Author MOJSILOVIC, N. ETH Zurich, Institute of Structural Engineering, Switzerland SIMUNDIC, G. and PAGE, A. University of Newcastle, Faculty of Engineering and Built Environment Abstract A joint research project by […]
Volume 1, C – 274: Effect of slag content on physical and mechanical properties of lightweight aggregate concrete small hollow blocks
Author JUN, L.; CHANGWEI, X.; RUNQING, L.; HONG, Q. Shenyang Jianzhu University, School of Material Science and Engineering Abstract This paper introduces a method of saving materials and energy through […]
Volume 1, C – 122: Compatibility of masonry components from gas permeability tests
Author WESOLOWSKA, M. University of Technology and Life Sciences Bydgoszcz, Department of Civil Engineering and Building Physics PAWELKOWSKI, K. and KEMPINSKI, M. and KACZMAREK, M. Kazimierz Wielki University, Department of […]
Volume 1, C – 109: The thermal performance of reverse brick veneer in Australian housing
Author PAGE, A.; HANDS, S. A.; MOGHTADERI, B. School of Engineering & Priority Research Centre For Energy, The University of Newcastle, NSW, Australia Abstract Historically, housing systems in Australia have […]