Volume 1, D – 198: Flat-Jack tests on stone masonry walls made of large granite blocks
Author MIRANDA, L. and GUEDES, J. and COSTA, C. and ALMEIDA, C. Faculty of Engineering of University of Porto, Civil Engineering COSTA, A. University of Aveiro, Civil Engineering Dept. Abstract […]
Volume 1, D – 197: The influence of material characteristics on the mechanical behaviour of stone masonry walls
Author ALMEIDA, C. and COSTA, C. Q. and GUEDES, J. and ARÊDE, A. and COSTA, A. A. Faculty of Engineering of University of Porto, Civil Engineering COSTA, A. University of […]
Volume 1, D – 186: Geometrical and mechanical characterization of one leaf stone masonry
Author ALMEIDA, C. and GUEDES, J. and ARÊDE, A. Faculty of Engineering of University of Porto, Civil Engineering Dept. COSTA, A. University of Aveiro, Civil Engineering Dept. Abstract The study […]
Volume 1, D – 170: In-situ airbag testing of unreinforced masonry walls
Author DERAKHSHAN, H.; LUMANTARNA, R.; DIZHUR, D.; INGHAM, J. M. Department of Civil and Environmental Engineering, University of Auckland Abstract A field testing programme was developed to investigate the out-of-plane […]
Volume 1, D – 168: Long term effects of floods on masonry walls: NDTs to measure the drying rate
Author BINDA, L.; CARDANI, G.; CANTINI, L.; TIRABOSCHI, C. Department of Structural Engineering, Politecnico di Milano, Italy Abstract Floods often occur in Italy and inundate masonry buildings. To examine the […]
Volume 1, D – 159: In-plane shear behaviour of masonry panels strengthened with stainless steel high stress reinforcement
Author MASIA, M. and PETERSEN, R. and KONTHESINGHA, C. The University of Newcastle, Centre for Infrastructure Performance and Reliability LAHRA, J. Helifix (Australia) Pty Ltd, Alexandria Abstract An experimental study […]
Volume 1, D – 158: Cyclic in-plane shear behaviour of unreinforced masonry panels retrofitted with fibre reinforced polymer strips
Author KONTHESINGHA, C. and MASIA, M. and PETERSEN, R The University of Newcastle, Centre for Infrastructure Performance and Reliability MOJSILOVIC, N. Institute of Structural Engineering, ETH Zurich, Switzerland SIMUNDIC, G. […]
Volume 1, D – 157: Assessing the validity of rocking in URM perforated shear walls
Author KNOX, C.; MA, Q.; INGHAM, J. M. University of Auckland, Department of Civil and Environmental Engineering Abstract The validity of implementing a ‘rocking wall retrofit’ for New Zealand’s earthquake […]
VIII Volume 1, D – 150: The Portuguese masonry’s mechanical characterization
Author PAULO PEREIRA, M. F.; AGUIAR, J. B.; CAMÕES, A.; LOURENÇO, P. B. Department of Civil Engineering, School of Engineering, University of Minho, Portugal Abstract The aim of this study […]
Volume 1, D – 147: A biaxial failure criterion for sequentially linear analysis
Author DEJONG, M. J.; HARRISON, S. University of Cambridge, Department of Engineering Abstract In this work, Sequentially Linear Analysis (SLA) is extended to include a biaxial failure criterion to model […]
Volume 1, D – 121: Non linear reticular models for unreinforced and reinforced masonry analyses
Author BENEDETTI, A. Chair of Structural rehabilitation, University of Bologna, ITALY, DICAM Department PELA’, L.University of Bologna, ITALY, DICAM Department RAMALHO, M.3 University of Sao Paulo, BRAZIL, Structural Engineering Dept. […]
Volume 1, D – 100: An evaluation of contact and non-contact lap splices using double pullout and wall specimens
Author AHMED, K.; FELDMAN, L. R. University of Saskatchewan, Department of Civil & Geological Engineering Abstract Six double pullout specimens and two wall splice specimens, all reinforced with 15 mm […]