Volume 2, E – 152: The new Brazilian Clay Masonry Code – 1st part: Design.
Author CORREA, M. R. S. University of Sao Paulo, Department of Structural Engineering DA SILVA, R. M.2 Federal University of Minas Gerais, Department of Structural Engineering Abstract This paper presents […]
Volume 2, E – 63: Design of walls subjected to combined loading according to EN 1996-1-1
Author CHRISTIANSEN, P. Danish Technological Institute Abstract Combined loading is defined as walls subjected to vertical and horizontal out-of-plane loading. These walls are typically three- or four-sided supported and with […]
Volume 2, E – 33: Rules for large size calcium silicate elements in DIN 1053 and Eurocode 6
Author SCHLUNDT, A. Bundesverband Kalksandsteinindustrie eV, Head of Standardisation Department, Hannover, Germany Abstract Large size calcium silicate elements (masonry units with nominal heights from 498 mm to 648 mm and […]
Volume 1, D – 332: Earthquake resistance of a terraced house – Verification of a new design approach via comparison with test results
Author KRANZLER, T. Bundesverband der Deutschen Ziegelindustrie, Bonn, Germany Abstract The paper deals with the verification of a new design approach for shear stressed masonry structures. Therefore the results of […]
Volume 1, D – 331: Pseudo-dynamic tests on a full scale masonry building
Author MEYER, U. Arge Mauerziegel, Bonn, Germany Abstract A full scale unreinforced masonry terraced house has been subjected to pseudo-dynamic tests to verify the resistance against earthquake loads in areas […]
Volume 1, D – 327: Mechanical properties of clay brick masonry bound with hydraulic limes and hydrated calcium lime
Author COSTIGAN, A.; PAVIA, S. Trinity College Dublin, Department of Civil, Structural and Environmental Engineering Abstract Due to their physical and chemical properties, mortars made with lime are considered to […]
Volume 1, D – 326: Production and testing of scale concrete blocks
Author BANTING, B.; HEEREMA, P.; EL-DAKHAKHNI, W. McMaster University, Department of Civil Engineering Abstract The acquisition of a Variable Scale Concrete Block Production Machine by McMaster University will facilitate the […]
Eurocode for Masonry, EN 1996-1-1 and EN 1996-2: Guidance and worked examples. ISBN 1759-1287
Eurocode for Masonry, EN 1996-1-1 and EN 1996-2: Guidance and worked examples. NOTE: This document is superseded by the 2nd edition which is available as an electronic document
Building Mortar for Low Rise Housing – Recommendations, Problems and Solutions
Author Professor Geoff Edgell BSc PhD CEng MICE FBMS and B A Haseltine BSc FCGI DIC FICE FIStructE FConsE Hon FBMS
Masonry design for disproportionate collapse requirements
Introduction Revised Building Regulations for England & Wales, related, in part, to the structural design of buildings to resist accidental damage, have recently been published together with the relevant Approved […]
Eurocode for Masonry, ENV 1996-1-1: Guidance and worked examples.
ISSN 1460-6909, Special Publication No. 1, 1997 British Masonry Society Eurocode for Masonry, ENV 1996-1-1: Guidance and worked examples.
Building Regulations – Part E testing available from CERAM Building Technology
CERAM Building Technology (CBT), part of CERAM, has set up a specialist testing facility to help designers, builders and building product manufacturers ensure that their products and developments meet the […]