Volume 2, F – 127: Parametric analysis of in plane loaded reinforced clay unit masonry walls
Author GUIDI, G.; MOSELE, F.; DA PORTO, F.; MODENA, C. University of Padova, Department of Structural and Transportation Engineering Abstract The mechanical behavior of a reinforced masonry system made with […]
Volume 2, F – 124: Problems related to grout injection of heritage buildings walls
Author URANJEK, M. Building and Civil engineering Institute ZRMK, Centre for Materials and Structures, Ljubljana, Slovenia ŽARNIC, R. and BOKAN-BOSILJKOV, V. and BOSILJKOV, V. University of Ljubljana, Faculty of Civil […]
Volume 2, F – 117: Delamination of FRP strips glued to masonry columns: a numerical insight
Author MILANI, G.; FEDELE, R. Politecnico di Milano, Dipartimento di Ingegneria Strutturale, Milan Abstract In this communication a heterogeneous model at the meso-scale for the interpretation of the In this […]
Volume 2, F – 116: Performance assessment of pumice aggregate concrete block walls
Author KUS, H. and EDIS, E. Istanbul Technical University, Faculty of Architecture GÖCER, Ö. and ÖZKAN, E. Beykent University, Faculty of Engineering and Architecture Abstract Pumice aggregate concrete hollow wall […]
Volume 2, F – 107: Calculation with a spreadsheet of wind load distribution over shear walls
Author VERMELTFOORT, A. T.; MARTENS, D. R. W. Eindhoven University of Technology, Department Structural Masonry Abstract One of the problems of interest in the seismic or wind design of masonry […]
Volume 2, F – 95: Seismic behaviour of confined autoclaved aerated concrete masonry buildings: A shaking table study
Author TOMAŽEVI, M.; GAMS, M. Slovenian National Building and Civil Engineering Institute, Ljubljana, Slovenia Abstract The seismic behaviour of typical residential confined masonry buildings constructed with aerated autoclaved concrete (AAC) […]
Volume 2, F – 68: Numerical analysis of masonry structures
Author SZOJDA, L. Silesian University of Technology, Department of Structural Engineering Abstract The behaviour of a masonry wall subjected to shear stress is presented in this paper. Masonry walls are […]
Volume 2, F – 3: Simple analyses of complex masonry structures. Achieving understanding in place of doubtful
Author HARVEY, B. Bill Harvey Associates Ltd Abstract There is a growing tendency to turn to finite elements as a panacea of analysis. The author’s experience is that, even when […]
Volume 2, E – 312: Calibration of partial safety factors for masonry panel design considering creep and damage
Author KIM, J. J.; REDA TAHA, M. M. University of New Mexico, Department of Civil Engineering Abstract The collapse of a historical masonry structures in Europe in the late 1990’s, […]
Volume 2, E – 310: Standardization of earth blocks in Germany
Author ZIEGERT, C. and MÜLLER, U. BAM Federal Institute for Materials Research and Testing, Division VII. RÖHLEN, U. Claytec e. K., Distribution and Technology Abstract The experience with the application […]
Volume 2, E – 267: The ‘Code For Sustainable Homes’: Maximising the ratings with AAC masonry
Author FUDGE, C. H+H UK Limited, UK Abstract In 2006, the UK Government published a Code for Sustainable Homes, intended as a single national standard to guide the housebuilding industry. […]
Volume 2, E – 151: The new Brazilian Clay Masonry Code – 2nd part: Execution and Site Control
Author DA SILVA, R. M. Federal University Of Minas Gerais, Department of Structures CORRÊA, M. R. S.2 School of Engineering of São Carlos – USP, Department of Structures Abstract This […]